Go to content
  • TSX:NANO
  • FF:LBMB
  • OTC:NNOMF
Inquiries
News Releases

Update on Nano One’s Breakthrough in Battery Longevity

Share this article:

Vancouver, Canada (TSX-V: NNO) (OTC-Nasdaq Intl Designation: NNOMF) (Frankfurt: LBMB).

Dr. Stephen Campbell, CTO of Nano One® Materials Corp. is pleased to present Nano One’s latest durability test results confirming that its high-voltage cobalt-free battery is also stable at elevated operating temperatures required for automotive, power tool and energy storage applications. These results augment ambient temperature results announced on October 13, 2020 and further demonstrate the longevity and stability of Nano One’s Lithium Nickel Manganese (LNM) battery system.

“Nano One has achieved over 500 fast charge and discharge cycles at 45°C,” said Dr. Campbell, “in an innovative battery design that pairs its high-voltage LNM cathode with a conventional electrolyte and a graphite anode. We have also reached 1000 fast charge and discharge cycles at 25°C demonstrating that issues of excessive gassing, anode contamination and poor cycling may be overcome.”

Nano One’s proprietary LNM battery enables the benefits of increased voltage, elevated operating temperatures and fast charging, by eliminating failure from gassing in the first few cycles and failure from manganese contamination of the anode in the first 100 cycles.

Dr. Campbell added “Nano One’s LNM battery innovation breaks through the barriers that have hindered the commercialization of LNM cathode materials in both conventional liquid and advanced solid-state batteries.”

LNM, also known as high voltage spinel (HVS), is a cobalt-free, low-cost cathode material that operates at 4.7 volts. This voltage is 25% higher than commercial high nickel cathodes, providing improved efficiency, thermal management and power. Battery pack models suggest that LNM cathodes may reduce costs by over 30% as compared to high nickel NMC materials [Wentker et al, Energies 12 (2019) 504-521].

Inspired by ESG (Environmental, Social, and Governance) concerns, the Nano One patented One Pot process combines sulfate-free feedstocks with lithium carbonate, additives and coating materials in a single reaction to, ultimately, form coated single crystal cathode materials with enhanced durability. This process further improves LNM economics and environmental sustainability by eliminating cobalt feedstock and sulfate waste and by reducing energy and water consumption.

 

 

The LNM cathode (LiNi0.5Mn1.5O4) was tested with a graphite anode and conventional electrolyte in a 20-layer pouch cell (4.75V 126mAh 0.592Wh) charging and discharging 12 times per day for 1000 cycles at 25ºC and for 500 cycles at 45ºC. This demonstrates enhanced durability under operating conditions that are relevant to automotive, power tool and energy storage applications in a cobalt-free, high voltage battery.

Nano One’s LNM cathode is a leading candidate for next generation lithium-ion and solid-state batteries because its durability and dimensional stability enable a stable interface with both liquid and solid electrolytes. Several independent evaluations are currently underway within the automotive and battery supply chain demanding lower cost, higher voltage and improved safety without compromising longevity and performance.

“Nano One has developed processes, materials and now a battery innovation to enable our novel cathode materials for the future of lithium-ion batteries,” Dr. Campbell added. “We are excited by the commercialization and partnership opportunities of this latest breakthrough.”

Nano One Materials Corp.

Dan Blondal, CEO

For information with respect to Nano One or the contents of this news release, please contact John Lando (President) at (604) 420-2041 or visit the website at www.nanoone.ca.

About Nano One

Nano One Materials Corp has developed patented technology for the low-cost production of high-performance lithium ion battery cathode materials used in electric vehicles, energy storage and consumer electronics. The processing technology enables lower cost feedstocks, simplifies production, and advances performance for a wide range of cathode materials. Nano One has built a demonstration pilot plant and is partnered with global leaders in the lithium ion battery supply chain to advance its lithium iron phosphate (LFP), lithium nickel manganese cobalt oxide (NMC) and lithium nickel manganese oxide (LNM) cathode technologies for large growth opportunities in e-mobility and renewable energy storage applications.

Nano One’s pilot and partnership activities are being funded with the assistance and support of the Government of Canada through Sustainable Development Technology Canada (SDTC), the Automotive Supplier Innovation Program (ASIP) a program of Innovation, Science and Economic Development Canada (ISED), and the Province of British Columbia through the Ministry of Energy, Mines and Petroleum Resources. Nano One’s mission is to establish its patented technology as a leading platform for the global production of a new generation of battery materials. www.nanoone.ca

Certain information contained herein may constitute “forward-looking information” under Canadian securities legislation. Forward-looking information includes, but is not limited to, any statements regarding its financial position, business strategy, growth strategies, budgets, operations, financial results, plans, objectives and other information that is not historical fact… Generally, forward-looking information can be identified by the use of forward-looking terminology such as ‘believe’, ‘expect’, ‘anticipate’, ‘plan’, ‘intend’, ‘continue’, ‘estimate’, ‘may’, ‘will’, ‘should’, ‘ongoing’, or variations of such words and phrases or statements that certain actions, events or results “will” occur. Forward-looking statements are based on the opinions and estimates of management as of the date such statements are made and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking statements or forward-looking information. See “Cautionary Note Regarding Forward-Looking Information” and “Risk Factors” in the Company’s Annual Information Form which is available on www.sedar.com for a discussion of the uncertainties, risks and assumptions associated with these statements. We caution that the list of risk factors and uncertainties is not exhaustive and other factors could also adversely affect our results… There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information. The Company does not undertake to update any forward-looking statements or forward-looking information that is incorporated by reference herein, except as required by applicable securities laws.

NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS NEWS RELEASE

Explore

Related Posts

See All
Explore

Related Posts

See All